#8 Standard Barrier Crimp In Fitting with GM Sensor

LS Swap GM A/C Pressure Sensor Kit – #8 Standard Barrier Hose (M10x1.25) Achieve factory-level engine management in your LS swap with the ACK-002 Integration Kit. This kit is designed to bridge the gap between your aftermarket A/C system and the GM ECM/PCM. By installing this sensor into your high-pressure line, your engine controller receives the real-time data necessary to bump the idle when the compressor engages and trigger the electric cooling fans based on A/C system pressure. Without this integration, LS-swapped vehicles often suffer from RPM dip or stalling at stoplights when the A/C is turned on, as the ECM cannot compensate for the sudden engine load. Kit Includes: (1) Steel Crimp-In Fitting: Specifically engineered for #8 Standard Barrier A/C hose. (1) GM A/C Pressure Sensor: OEM-spec sensor with M10x1.25 metric threads. Technical Specifications Fitting Material: Heavy-duty Steel for a reliable, leak-free crimp. Thread Pitch: M10x1.25 (Metric). Application: High-Pressure Discharge Hose (Compressor to Condenser). Control Type: Full ECM/PCM integration (Not a simple binary switch). Is your hose #8 Standard Barrier? Most aftermarket A/C systems (such as Vintage Air or Sanden-style setups) use #8 hose for the compressor discharge. To ensure this kit fits your application, please verify your hose dimensions using the table below: Hose Size Inner Diameter (I.D.) Outer Diameter (O.D.) Application #8 Standard Barrier 13/32” 29/32” High Pressure / Discharge Related Components If your build requires a different mounting style or a safety-only switch, please see our other LS A/C solutions: Looking for a Weld-In Fitting (Fitting only)? See ACF-001 Looking for a Weld-In Kit (Fitting & Sensor)? See ACK-001 Need a standalone Safety Switch? See ACS-002 Need a Crimp Fitting for a Binary Switch (7/16 Port)? See ACF-006